Bulletproof Doors and Windows

Bullet Resistant Door Picture

Bullet Resistant Doors (DE Series)

Republic′s bullet resistant DE series doors are tested and labeled in accordance with UL752 and are available in all 8 levels of bullet resistant protection. Doors are available in cold rolled steel or galvanealed (A60) steel. Face sheets are continuously welded to hinge and lock channels. SDI Level 4 - Physical performance level A


  • 1 ¾" (44.4) full flush design, rated for light to maximum-duty use
  • Polystyrene or mineral wool insulation
  • Hinge edge is non-beveled and reinforced with a full height 10 gauge steel channel projection welded at a maximum of 5" on center
  • 16 gauge flush top and inverted bottom channels welded to both skins
  • Lock edge is non-beveled and reinforced with a continuous 14 gauge channel, mortised and cylindrical lock reinforcements are integral 14 gauge reinforcements
  • Doors are thoroughly cleaned, phosphatized, and primed with a coat of force cured rust inhibiting primer that meets and/or exceeds the requirements of ANSI A250.10 (120 hour continuous salt spray test per ASTM B117 and 240 hour continuous humidity test per ASTM D4585)
  • Doors are individually packaged and fully plastic wrapped to prevent damage
Used in:
Data Centers
Doctors Offices
Court Rooms