|
|
| Model 200 & 200-20
Architects, engineers, contractors and building owners who place energy conservation foremost in their planning will readily recognize the significance of Model 200 & 200(-20), an insulated overhead sectional door for commercial and industrial applications.
Thermospan® 200 and 200-20 Features
Energy efficiency
Thermospan® 200 & 200-20 is a total insulating system,
including thermal barrier and joint seals as well as vinyl
top seal and bottom astragal-all attached to the door
sections. All seals are factory-installed to save
installation time and avoid the problems sometimes found on
conventional doors due to inadvertent exclusion of seals
during installation.
Maximum efficiency and operation
Chemical bonding of CFC free polyurethane to steel skins
creates a unitized body with superior strength, insulation
and dent-resistant characteristics.
High quality materials
High quality materials are provided with the doors such as
hardware plates at all fastener points for added durability
and life, hot dipped galvanized steel end caps protect the
end of the door and help provide a tight seal against the
jambs and graduated hinges and inclined adjustable track
assure a snug seal against air infiltration.
Virtually maintenance free
Thermospan® 200 and 200-20 are virtually maintenance free.
They are impact-resistant and feature a pre-painted exterior
surface. The interior and exterior skins are hot-dipped,
galvanized, structural quality steel is factory finished
with baked-on corrosion-resistant primer and white polyester
finish coat (brown exterior is available on Thermospan® 200
model).
Factory Glazed Windows 24" X 6"
The Thermospan® comes with factory installed 1/2" sealed
insulated glass windows mounted in a molded high-impact
frame.
Specifications and Drawings
Wayne-Dalton offers specifications and full technical
support for our commercial products. For further information
please visit our product solution center.
Extended limited warranty
Sections are warranted for TEN (10) YEARS against cracking,
splitting, or deterioration due to rust-through, and SEVEN
(7) YEARS against separation/degradation of foam insulation.
TEN (10) YEARS on insulation value.
|